Jandy
HeatPro Titanium Heat Pump 110K BTU(Model JE1100T)
The Jandy HeatPro (model JE1100T) is a 110,000 BTU titanium heat pump built for 15,000-25,000 gallon residential pools, pulling ambient heat from the air rather than burning gas directly, which makes it substantially cheaper to run than a gas heater in most climates.
btu: 110,000 BTUtype: Heat Pump (Electric)heat exchanger: Titanium
- ✓110,000 BTU output, sized for 15,000-25,000 gallon pools
- ✓Titanium heat exchanger resists corrosion — ideal for saltwater pools
- ✓More efficient to run than gas heaters in most climates
Compare Prices
The Jandy HeatPro (model JE1100T) is a 110,000 BTU heat pump — rather than burning gas directly like a traditional pool heater, it works like a reverse air conditioner, pulling ambient heat from the air and transferring it into the pool water. This makes it substantially more efficient to run than a gas heater in most climates, though it heats more slowly and works best when air temperature stays above roughly 50°F, since colder air has less ambient heat to extract.
The titanium heat exchanger resists corrosion from pool chemicals significantly better than the cupro-nickel exchangers used in cheaper heat pumps, which matters most for saltwater pools where corrosion risk is higher.
Sizing matters more with heat pumps than gas heaters — undersizing leads to slow, expensive-feeling heat-up times. As a rough guide, 110,000 BTU suits pools in the 15,000-25,000 gallon range in moderate climates; larger pools or colder regions may need a higher-BTU unit or two units in parallel.
Who it's for: pool owners in moderate-to-warm climates who want lower ongoing heating costs than gas and don't need to heat the pool quickly for occasional use — heat pumps are built for maintaining temperature over time, not rapid one-time heating. If you're in a colder climate or need to heat up fast for infrequent use (like heating only for weekend guests), a gas heater will outperform a heat pump despite higher running costs.
The Jandy HeatPro (model JE1100T) is a 110,000 BTU heat pump — rather than burning gas directly like a traditional pool heater, it works like a reverse air conditioner, pulling ambient heat from the air and transferring it into the pool water. This makes it substantially more efficient to run than a gas heater in most climates, though it heats more slowly and works best when air temperature stays above roughly 50°F, since colder air has less ambient heat to extract.
The titanium heat exchanger resists corrosion from pool chemicals significantly better than the cupro-nickel exchangers used in cheaper heat pumps, which matters most for saltwater pools where corrosion risk is higher.
Sizing matters more with heat pumps than gas heaters — undersizing leads to slow, expensive-feeling heat-up times. As a rough guide, 110,000 BTU suits pools in the 15,000-25,000 gallon range in moderate climates; larger pools or colder regions may need a higher-BTU unit or two units in parallel.
Who it's for: pool owners in moderate-to-warm climates who want lower ongoing heating costs than gas and don't need to heat the pool quickly for occasional use — heat pumps are built for maintaining temperature over time, not rapid one-time heating. If you're in a colder climate or need to heat up fast for infrequent use (like heating only for weekend guests), a gas heater will outperform a heat pump despite higher running costs.